EasyManua.ls Logo

Xomax XM-CDB617 User Manual

Xomax XM-CDB617
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
XOMAX
XM-CDB617
Topic:
EN
Thank you for purchasing one of our Xomax products!
We appreciate your condence. Enjoy your brand new multimedia unit!
Please read the following manual carefully before you install and use the
unit. Please save this manual in case you will need to clarify further possible
questions regarding installation and usage of our product.
We recommend you to let the technician install the unit in your vehicle.
You can nd the detailed manual for your XOMAX product on our homepage:
www.xomax.de/download
i
Installation Manual
XM-CDB617
Question and Answer IconNeed help?

Do you have a question about the Xomax XM-CDB617 and is the answer not in the manual?

Xomax XM-CDB617 Specifications

General IconGeneral
Dimensions178 x 100 x 165 mm
Resolution800 x 480 pixels
DIN Size2 DIN
BluetoothYes, with hands-free calling
SD Card SlotYes (Front)
Aux InputYes (Front)
Radio TunerFM/AM
Supported Formats (Audio)MP3, WMA, WAV, FLAC
Supported Formats (Video)AVI, MP4, RMVB
PlaybackUSB/SD/AUX/Bluetooth
Remote ControlYes
Steering Wheel Control CompatibilityYes (With Adapter, sold separately)
USB PortYes (Front)
EqualizerYes (Preset EQ curves)

Summary

Safety Instructions and Precautions

Power, Temperature, and Fuses

Use correct power supply, manage temperature, and replace fuses with matching specifications.

Installation Guide

Pre-Installation Checks and Wiring

Disconnect battery, verify vehicle fit, check power supply, and adhere to wiring diagrams.

Speaker and Cable Management

Speaker and Cable Management

Ensure correct speaker impedance (4-8 Ohm), manage cables neatly, and avoid short circuits.

Power and Ignition Wiring

Connect red wire to ignition for auto-off; route wiring safely, avoiding engine bay for the yellow wire.

Installation Steps

Mounting and Securing

Connecting and Finalizing Installation

Unit Connection and Insertion

Connects the ISO cable and aerial, then slides the unit into the frame until it locks into place.

ISO Plug Pin Assignments

Socket A: Power and Control Pins

Details pinouts for power (+12V battery, ignition) and control signals, with notes on pin interchangeability.

Socket B: Speaker Output Pins

Details pinouts for connecting all four speakers (front/rear, left/right) with correct polarity.

Deinstallation Procedures

Unit Removal Steps

Using Extraction Keys

Explains inserting extraction keys into recesses to disengage the unit's retaining side-cogs.

Common Troubleshooting

Troubleshooting Reception and Settings

Related product manuals