The name and content of
harmful substances in products
Shell parts
Part Name/
Hazardous
Substance
(Pb) (Hg) （Cd） （Cr6+） （PBB） （PBDE）
This form has been prepared in accordance with st/T 11364.
○：Represents that the content of the hazardous substance in all homogeneous materials of the component is
below the limit requirements specified by GB/T26572
×：Represents that the content of the hazardous substance in at least one of the homogeneous materials of the
part exceeds the limit requirements specified by GB/T26572.
Remarks: Some of the components of the above standard "×" contain toxic substances exceeding the standard
are due to the current technical level of the industry, and there is no way to replace or reduce it for the time
being.
Unless otherwise specifically marked, this mark is a sign of the environmental use period for
the products involved. Some replaceable parts may have a different eco-friendly service life
(e.g. battery cell modules) This eco-friendly service life only applies to the product operating
under the conditions specified in the product manual.
×
Motor
Battery
Pcb
Internal wire
metal parts
To Next Page
Loading...
Need help?
General