Installation instructions
Charging base installation
1.Please firmly insert the pillar into
the socket of the base
Note
Do not place the charging cable in a place where people are walking around.
Do not place in unstable places such as carpets.
Store this product in a level stable place such as the floor.
If a collision causes the product to tip over, it may result in injury or property
damage.
2.Put the vacuum cleaner into the charging
baes for charging.
3.Charge the USB with adapter.
4.In addition to the host, small square brushes
and combination flat brushes can also be placed
on the charging base
To Next Page
Loading...
Need help?
General