Digital Photo Frame 9
English
OPERATION
Power Supply
For charging your XORO CPF, do only use the original charging cable. Please observe the
information on the nameplate of the charging cable.
Notes:
• The charging cable provides the required power supply. Using any other power cable for
charging the device, may cause damages.
• If possible, do only charge the device when it‘s on low voltage. This will increase the lifetime
of the internal battery.
USB Ports & Memory Cards
The device has a MiniUSB 2.0 port. At this port, USB-devices such as (USB-sticks, HDD, SSD) or
USB-input devices (mouse, keyboard etc.) can be plugged in. The device has a SD card slot too. The
device supports memory cards up to 32gb. Supported formats are: FAT & NTFS.
Notes:
•
Only FAT/FAT32/NTFS are official supported formats. If your memory card is formatted with
another format, it might not be detected by the device.
•
The USB Ports are not for charging external devices.
• As there are many different USB devices on the market, a general compatibility cannot be
granted.
Cleaning
Before cleaning your photo frame, make sure the unit is turned off. Use only suitable cleaning fluids
and a clean, soft, lint-free cloth to clean the surface.
Notes:
• We do not recommend using ammonia or alcohol based cleaners on the screen or plastic
housing. Some chemical cleaning agents can damage the screen or the display housing.
• The manufacturer is not liable for damage resulting from the use of ammonia or alcohol-
based detergents!
Items and Cleaning
To Next Page
Loading...