XP Metal Detectors Deus V4 User Manual

USER'S MANUAL
MADE IN FRANCE

XP Metal Detectors Deus V4 Specifications

General

Pinpoint Function	Yes
Sensitivity	Adjustable
Recovery Speed	Adjustable
Battery Life	Up to 20 hours
Wireless Technology	Yes, between coil, remote, and headphones
Discrimination	Yes, adjustable
Wireless Headphones	WS5
Display	LCD
Frequency Shift	Yes
Iron Volume	Adjustable
Audio Tones	Adjustable, multi-tone

Summary

Technical Introduction

Assembly

Standard Coil Fitting

Guide for attaching the standard search coil to the detector stem.

HF Coil Assembly

Steps for assembling the High Frequency (HF) search coil.

Remote Control

Factory Programs

Starting Up

Menu

Discrimination

Adjusting the detector's sensitivity to differentiate between target types.

Discrimination IAR (Gold Field)

Specific discrimination setting for gold prospecting in mineralized ground.

Sensitivity

Controls how the detector reacts to signals from targets at different distances.

Frequency

Adjusting the detection frequency to suit ground conditions and target types.

Iron Volume

Adjusts the volume of the low-pitched tone typically associated with iron targets.

Reactivity

Determines how quickly the detector analyzes signals and separates close targets.

Audio Response

Amplifies the volume of deep targets, affecting the sound curve's dynamic range.

Notch

Rejects specific target conductivity ranges without affecting others.

Ground

General Features

Overview of soil mineralisation effects and ground balance concepts.

GB (Ground Balance)

Manages how the detector compensates for ground mineralisation.

Manual Mode

Allows manual adjustment of ground rejection levels for optimal performance.

Pumping Mode

Semi-automatic ground balance adjustment based on soil type.

Pumping Mode Prog. 10 Gold Field

Specific pumping mode for gold prospecting in mineralized soils.

Tracking Mode

Automatically readjusts ground balance based on continuously scanned ground values.

Beach Mode

Adjusts ground balance for wet, saline ground conditions to reduce interference.

Non-Motion

Mode Selection

Options for choosing between Pinpoint, Audio Disc, All Metal, and Disc modes.

Pinpoint (Localisation)

Method for precise target location using motionless coil detection.

Non-Motion Disc, Audio Disc & All Metal

Detection modes requiring fine ground balance for stable operation.

Option

Pinpointer MI-6

Connecting and using the MI-6 pinpointer with the DEUS detector.

MI-6 Sensitivity

Adjusting the sensitivity levels of the MI-6 pinpointer.

MI-6 Tone Adjustment

Customizing the audio tone for the MI-6 pinpointer.

MI-6 Audio Pitch/Pulse

Selecting between Pitch and Pulse audio modes for target identification.

Saving Custom Programs

Creating and saving custom program settings for the MI-6.

Remote Control Programs

Managing and creating custom programs stored on the remote control.

Coils

Selecting and managing different search coils used with the detector.

Pairing New Coil

Steps to pair an additional search coil with the remote and headphones.

Delete Coil from List

Removing a previously paired coil from the device's memory.

Configuration

Adjusting general technical settings for the remote control.

Oscilloscope Display XY

Visualizing target signatures as an oscilloscope for enhanced identification.

Zoom XY Mode

Adjusting the magnification level of the XY trace for detailed analysis.

ID Norm

Standardizes target ID values across different frequencies.

Smartphone Application

Future feature for sending target and ground data to a smartphone.

Updates

Information on updating the detector's software via USB and internet.

Wireless Headphones

Menu Access

Navigating and adjusting settings via the headphone menu.

Discrimination

Adjusting target discrimination levels through the headphones.

Sensitivity

Adjusting detector sensitivity using the headphone controls.

Ground Balance

Adjusting ground balance settings from the headphones.

Frequency

Selecting the operating frequency via the headphone menu.

Tone

Choosing the number of audio tones for target identification.

Volume

Adjusting the sound volume in the wireless headphones.

Coil Selection

Selecting the active search coil through the headphone menu.

Coil Pairing

Pairing new coils with the headphones and remote control.

Delete Coil

Removing a coil from the headphone's list of paired devices.

Programs P1 to P10

Selecting pre-configured factory programs via the headphones.

Saving Modified Programs

Saving custom program settings on the headphones.

Backphone Replacement

Instructions for replacing the electronic housing of the wireless headphones.

Pairing Headphones with MI-6

Connecting the MI-6 pinpointer to the headphones.

Power Supply - Batteries

Battery Status

Display indicators for the charge level of the coil, remote, and pinpointer.

Battery Life

Information on expected battery duration based on modes and frequencies.

Charging Time

Details on how long it takes to charge the detector components.

Charging Process

Step-by-step guide for charging the detector's components using the supplied adapter.

Replacing Batteries

Guide for replacing batteries in the remote control and headphones.

Precautions for Use

Essential safety measures for handling the detector and its batteries.

Expert

Multi Tones

Assigning different audio tones to target categories based on conductivity.

Pitch

Audio mode where signal strength affects tone volume and pitch.

Full Tone

Produces a tone variation for each target ID value based on conductivity.

Multi Tones, Thresholds and Tones

Customizing sound partitioning and thresholds within multi-tone modes.

TX Power

Adjusting the strength of the emitted electromagnetic field (transmitter power).

Audio Overload

Setting an overload sound for targets close to the coil.

Frequency Shift

Adjusting operational frequency to avoid interference from nearby detectors.

Silencer

Applying a filter to eliminate crackling sounds from ferrous targets.

Multi Notch and Window Width

Advanced notch function to widen rejection windows for target conductivity ranges.

Notch Ground

Rejecting specific ground value windows to avoid false signals from hot rocks.

Practical Information

Advice Before Beginning Detecting

Guidance on preparation, practice sites, and target identification.

Optimise Your Searching

Techniques for effective coil sweeping and target detection.

Locating a Target Using Crossed Sweeps

Method for precise target pinpointing using intersecting sweep patterns.

Precaution for Use

Battery and Detector Precautions

Essential safety measures for handling the detector and its batteries.

Troubleshooting

Performance Issues

Solutions for common problems like high sensitivity, interference, and ground balance.

Coil and Sound Issues

Troubleshooting for coil not switching on and no detection sound.

Specifications

Accessories

Spare Parts

Warranty

Quick Start