Need help?Do you have a question about the Xpand AE125H and is the answer not in the manual?
General| Technology | RF (Radio Frequency) |
|---|---|
| Frame Type | Universal Fit |
| Lens Type | LCD |
| Type | Active |
| Compatibility | XPAND Universal 3D TVs, XPAND 3D Cinema Systems |
| Battery Type | Rechargeable Lithium-Ion |
| Charging Time | Approximately 2 hours |
Power LED (green) and Sync LED (yellow) status for emitter and sync signal.
24VDC power connector and BNC sync signal input connector.
Button to reverse the IR sync signal.
Connect the 24VDC power adapter to an AC outlet and the emitter.
Use the included sync cable to connect projector sync output to the emitter.
Aim emitter towards screen, avoid obstacles, ensure ±25° angle coverage.
Use rubberized feet for placement or mounting hole for wall attachment.
Describes the function of the Power LED and Sync LED.
Convenient button to reverse the IR sync signal.
Checks power, sync cable connection, and glasses sync for operation.
Warnings regarding seizures, eye fatigue, and young children's vision.
Choking hazard for small children and after-effects of stereoscopic viewing.
Do not use 3D glasses for driving, swimming, or near hazards.
Read, keep, heed instructions; avoid water; clean with dry cloth.
Infrared sync, VESA Stereo input, Encrypted output, shutter frequencies.
Reverse sync function, mounting options, connector types, coverage range.
Sync cable details and power adapter specifications.
Operating temperature and dimensions/weight.
To Next Page
