To Next PageTo Next Page
Need help?Do you have a question about the Xpelair CF20 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| IP Rating | IPX4 |
| Frequency | 50 Hz |
| Airflow | 200 m³/h |
| Mounting | Wall |
Fan is guaranteed against defects for 3 years from date of purchase.
See International section for warranty and service contact details.
Xpelair offers free technical advice, design service, quotations, and site surveys.
Please ask for details on telephone and fax numbers provided.
Provides address, Tel, Fax, Sales/Spares Hotline, and Web details for the UK office.
Contact local distributor or Xpelair direct for guarantee claims.
Contact local Xpelair distributor for technical advice and service.
Electrical schematic for the DX200 model, showing connections and components.
Electrical schematic for the CF20 model, including lamp connections.
Electrical schematic for CF20T/DX200T models, showing multiple settings.
List of optional accessories to aid installation, presented in Spanish and Arabic.
Covers regulations, qualified electrician, and electrical supply checks.
Guidance on placement away from heat sources and ventilation safety.
Requirement to fit a condensation trap if ductwork is higher than the fan.
Introduces various mounting options: wall/ceiling, surface/flush.
Step-by-step instructions for surface mounting the fan on a wall.
Step-by-step instructions for flush mounting the fan on a wall.
Step-by-step instructions for surface mounting the fan on a ceiling.
Step-by-step instructions for flush mounting the fan on a ceiling.
Instructions for preparing the fan unit, including cover removal and tape application.
Covers setting fan speed, trickle speed, and time delay start.
Steps for physically mounting the fan box to the wall or ceiling.
Notes that the DX200 model has no user adjustments.
Details on adjusting the timer over-run period for the DX200T model.
Details on adjusting the humidity setting for the CF20 model.
Details on adjusting timer and humidity settings for the CF20T model.
Instructions for operating the DX200 fan using an external switch.
Instructions for operating the DX200T fan, including timer and speed settings.
Explanation of the time delay start feature for fans with this option.
Describes operation with separate on/off and pull cord switches.
Safety instruction to disconnect power before cleaning the fan unit.
Guidance on proper cleaning methods for the fan's exterior surface.
