Need help?Do you have a question about the XPower 450 and is the answer not in the manual?
General| Model | XPower 450 |
|---|---|
| Output Power | 450W continuous |
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Output Waveform | Modified Sine Wave |
| Efficiency | >85% |
| Dimensions | 8.5 in x 4.5 in x 2 in |
| Weight | 2.2 lbs |
| Surge Power | 900W |
| Peak Power | 900W |
| Output Frequency | 60 Hz |
| Cooling | Fan cooled |
| Protection Features | Overload, overheat, short circuit, low voltage, high voltage |
Identifies critical hazards like shock, heat, and explosion, along with general cautions for safe operation.
Guidelines for selecting an optimal site for inverter placement, considering dryness, temperature, ventilation, and cleanliness.
Instructions for physically attaching the inverter to a mounting surface, including orientation and screw placement.
Methods for connecting the inverter to a 12V battery using cable clips or hardwiring, including safety precautions.
Explains chassis grounding importance, locations, and detailed steps for connecting to the ground screw.
Instructions for periodically testing the GFCI outlet to ensure its proper operation and safety.
To Next Page
