To Next PageTo Next Page
Need help?Do you have a question about the XPower 1500 and is the answer not in the manual?
General| Model | XPower 1500 |
|---|---|
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Waveform | Modified Sine Wave |
| Overload Protection | Yes |
| Frequency | 60 Hz |
| Power Output | 1500W |
| Peak Power | 3000W |
| Protection | Overload, Overheat, Short Circuit, Low Voltage, High Voltage |
Explains the guide's aim: installing, operating, maintaining, troubleshooting the inverter.
Details what the guide covers and what it excludes regarding battery information.
Identifies the intended users of the guide as installers and operators.
Explains symbols like WARNING, CAUTION, and Important notes used in the guide.
Points to the Xantrex website for additional product and service information.
Describes continuous power, surge capability, and low standby demand of the inverter.
Highlights the inverter's compactness, light weight, and ease of installation.
Details protection features like low battery, overload, and over-temperature shutdown.
Lists all items included in the XPower 1500 package.
Describes the AC panel features: On/Off switch, power/fault lights, and AC outlets.
Describes the DC panel features: ground screw, terminals, ventilation openings, and serial number.
Steps to plan the installation for optimal performance and meet power needs.
Information on meeting electrical installation codes and requirements.
Guidance on determining the necessary battery capacity based on load usage.
Importance of selecting an appropriate charging system for battery health.
Criteria for choosing a safe and suitable installation location for the inverter.
Importance of selecting proper DC input and chassis ground cable sizes.
How to select the correct fuse or circuit breaker size for the system.
Covers safety, tools, materials, and steps for installing the inverter.
Review important safety instructions before beginning installation.
Lists necessary tools and materials for a successful installation.
Instructions for properly mounting the XPower 1500 unit in a vehicle.
Detailed steps for connecting the inverter's chassis ground.
Instructions for safely connecting the DC power cables to the inverter.
Groups critical safety warnings about connections and polarity.
Step-by-step instructions to turn the inverter on and off using the front panel switch.
Important caution regarding the On/Off switch not disconnecting DC battery power.
Guidance on operating multiple loads sequentially and turning the inverter off when not in use.
Details output power, input voltage ranges, and related performance limits.
Discusses compatible loads, high surge loads, and incompatible 'trouble' loads.
Addresses common problems like audio buzz and TV reception interference.
A comprehensive table of problems, causes, and solutions.
Solutions for low output voltage with different indicator light statuses.
Solutions for thermal shutdown, overload, short circuits, and low battery alarms.
Groups critical safety warnings about electrical shock and equipment damage.
Details electrical specifications like output power, voltage, waveform, and efficiency.
Provides physical dimensions and mounting information for the inverter.
Explains automotive starting batteries and their limitations for deep discharge applications.
Describes deep-cycle batteries and their suitability for inverter applications.
Discusses battery size, capacity ratings (Ah, Reserve Capacity), and voltage requirements.
Step-by-step guide and worksheet for calculating required battery capacity.
Guidance on connecting multiple batteries in parallel or using separate battery banks.
Critical caution regarding correct battery voltage connection and paralleling dissimilar batteries.
Covers handling precautions, explosive gases, and temperature sensitivity of batteries.
Tips on battery maintenance, electrolyte levels, charging, and state of charge measurement.
Outlines requirements for a charging system to maintain battery health.
Discusses using standard alternators, controllers, or high-output alternators for charging.
Guidelines for recharging from AC power and alternative energy sources.
Critical safety cautions regarding direct inverter connection to alternators or energy sources.
Covers warranty coverage, period, and Xantrex's service options.
Instructions on how to contact Xantrex for troubleshooting and warranty service.
Details required proof of purchase and items not covered by the warranty.
Provides warranty disclaimers and limitations on product use, especially for medical devices.
Outlines suggested and alternative methods for returning the product for service.
Information on servicing products after the warranty period has expired.
Form to record system details for efficient customer service interaction.
