EasyManuals Logo

XPower A-2S User Manual

XPower A-2S
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
English - 7
Breathing Hole
WARNING
Do not tape or block the breathing holes on
the tapered flow nozzle and the air pump
adapters.
The breathing holes allow the machine to
release the air pressure when the straw
adapter or the detail brush is blocked.
Blocking the breathing holes could cause
serious failure on the machine and void the
warranty.
Nozzle Installation (Continued)
!
The tapered flow nozzle, straw
adapter and the detail brush should
be used together.
Tapered Flow Nozzle
Attach the straw adapter onto the
tapered flow nozzle.
Straw Adapter
Insert the detail brush inside the
other end of the straw adapter.
Detail Brush
Attach the whole set of the nozzles
onto the electric duster.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the XPower A-2S and is the answer not in the manual?

XPower A-2S Specifications

General IconGeneral
BrandXPower
ModelA-2S
CategoryDryer
LanguageEnglish

Related product manuals