XPower B-16 User Manual

Operation / Instructions
XPOWER B-16 Stand Dryers are designed for hands-free pet drying.
1. Carefully follow the assembly instructions. Inspect the unit completely for any shipping damage or
missing parts.
2. Upon assembly, place the dryer on a flat surface. Plug the electrical cord into a 3-prong GFCI outlet.
3. Turn on the AIR FLOW switch to desired speed.
4. If heat is required, turn heat switch to position 1 (for low heat) or position 2 (for high heat).
5. All Dryers in operation must be supervised at all times.
6. Use the stand adjustment handle to set the desired height and make sure to tighten the handle
afterwards.
- 2 -

XPower B-16 Specifications

General

Brand	XPower
Model	B-16
Category	Pet Care Product
Language	English