XPower B-24 - Operating the Pet Dryer; Technical Specifications

OPERATION
1. Place the dryer on a flat surface. Plug the electrical cord into a 3-prong GFCI outlet.
2. To use as a dryer, connect the hose to the front hose connector and aach the desired nozzle.
Turn on switch to desired speed.
3. For B-24,to use heang element, choose desired heat seng (I or II) or leave on off seng.
4. To reduce the risk of injury, close supervision is necessary when the unit is used near children.
Do not allow children to play with or around the unit.
- 2 -
Volt / Cycle 115 V / 60 Hz
Horse Power 3 HP
Amp
12 A
Heat Sengs Dual
Max Airflow
150 CFM
Speeds Control Variable
Overheang Protecon Dual Thermal
Unit Weight 8.8 lbs
Unit Size 14 x 6.3 x 9.2 inch
Cord (Length / Dia) 10  / 16 AWG
Hose (Length / Dia / Material) 8  / 1.7 inch / PU
Housing Material ABS
Model B-24
115 V / 60 Hz
4 HP
12 A
N.A.
160 CFM
Variable
Dual Thermal
12.3 lbs
17x6.3x9.3 inch
10  / 16 AWG
8  / 1.7 inch / PU
ABS
B-25
SPECIFICATIONS