1. To keep the Air Dancer Blower clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Air Dancer Blower with water.
3. When not in use, unplug and store the Air Dancer Blower in a dry indoor place.
4. Always disconnect the Air Dancer Blower from its power source before performing any
maintenance or cleaning.
Problem Possible Cause Soluon
a) Switch is OFF Turn switch ON
b) Faulty switch/cord Replace switch or cord
a) Check for obstrucon entering
through the intake or exhaust
Remove obstrucon
b) Check for any pressure against
Remove any pressure
Weak Air Flow a) Obstructed vents/inlets Clean out vents/inlets
Motor Not Running
Scraping Noise From
Air Dancer Blower
To Next Page
