XPower X-3400A - Page 23

In order to remove airborne particles from the surrounding environment, XPOWER Air Scrubbers
are designed to draw air through a series of filters and deliver the purest air. Each filter stage
operates with progressively higher efficiency. The unit removes airborne particles like hair, skin
flakes, visible dust, mold spores, pollen, pet dander and miscellaneous debris.
1. XPOWER Air Scrubbers are shipped ready-to-use. Prior to plugging the unit
into the power source, inspect completely for any shipping damage.
2. Carefully place the Air Scrubbers upright on a stable, flat dry surface.
3. Plug the electrical cord into the power outlet.
4. The unit can be used in 2 different angle positions: vertical
and horizontal.
5. Turn the control knob to desired speed and make sure the unit
operates normally.
6. To reduce the risk of injury, close supervision is necessary when the
machine is used near children. Do not allow children to play with, or
around the Air Scrubber at any time.
Air Scrubbers Storage
Air Scrubbers can be stacked (up to 5) on their sides for
storage. Stacking feature is not secure for transportation.
Operaon
** Actual parts are not limited on this list, contact XPOWER for ordering parts.
Item No.
Parts Name
Item No.
Parts Name
1
Removable Air Inlet Foam Cap
2
Air Inlet
3
Inlet Panel
4
Latch
5
16”x16” Nylon Mesh Filter
6
Activated Carbon Filter
7
2" Thick HEPA Filter
8
GFCI Receptacle
9
Front Housing
10
Pressure Switch
11
Fan
12
Motor
13
HEPA Filter Change Light
14
Speed Control Knob
15
Control Panel
16
Potentiometer
17
Air Outlet Grill
18
Rear Housing
Parts List (ex. X-3400A)