Why is my XPower X-3400A Scrubber motor not running?
If the XPower Scrubber motor isn't running, first ensure the unit is properly plugged in and the switch is in the ON position. If it still doesn't work, check the outlet for power failure and try a different outlet. If neither of these solutions work, it could be due to wiring failure.
How to fix weak airflow in my XPower X-3400A?
If you're experiencing weak airflow with your XPower Scrubber, the most likely cause is obstructed vents and/or filters. To resolve this, thoroughly clean out the vents, inlets, and filters.
What to do if my XPower Scrubber fan is making a scraping noise?
If your XPower Scrubber fan is making a scraping noise, it could be due to an obstruction at the intake or exhaust. Remove any obstructions to see if that resolves the issue. If the noise persists, the fan might be broken.
Why is the 'change light' illuminated on my XPower X-3400A?
The 'change light' on your XPower Scrubber illuminates when there is insufficient airflow due to clogged filters. You should replace the filters to resolve this issue.
General| Model | X-3400A |
|---|---|
| Category | Scrubber |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Weight | 12 kg |
Guidance on stacking multiple air scrubbers for storage, noting it's not for transportation.
Details on the GFCI daisy chain capability for the X-3400A model.
Explanation of the Filter Change Light indicator and its function.
Guidance on filter maintenance, replacement, and optimization for XPOWER Air Scrubbers.
To Next Page