XPower X-3400A - Cleaning of Filters

To Next Page

To Previous Page

- 12 -

NFR12 & NFS16

- Nylon Mesh Filters are washable. These filters will protect the inner filters from

larger particles and therefore extend the life and usage of the primary HEPA filters. Always make sure

the Air Scrubber is turned off before removing filters. Before cleaning, remove all the debris from the

nylon mesh, rinse with water and lay filter flat on a clean and dry surface and let dry completely before

re-installing. NFR12 fits X-3500 model only; the NFS16 fits all XPOWER Air Scrubbers.

Cleaning of Filters

Fig. 1

Turn off the machine

before cleaning the

mesh filter

Fig. 3

Let filter dry on

a clean and flat

surface

Fig. 4

Re-install the clean,

dry filter

Fig. 2

Remove particles

before rinsing with

water