- 13 -
PF16
- Pleated Media Filter can be cleaned using a dry cloth or portable vacuum cleaner. Make sure
the Air Scrubber is turned off before removing the filter. Apply gentle pressure when cleaning the
surface of the filter to avoid breaking. Never use water when cleaning the PF16. If the filter is loaded
with particles, it is advised to replace it with a new one.
HEPA35 & HEPA50 – HIGH EFFICIENCY PARTICULATE AIR FILTERS, also known as HEPA
filters, ensure superior air quality inside our homes and protect us from a wide range of health risks
associated with indoor air pollution. These filters are designed and implemented to trap even the tiniest
contaminants (approximately 99.97% of all particles measuring 0.3 microns) that aren’t usually captured
by traditional air filters, in order to prevent allergies and other common respiratory problems. HEPA
filters require a simple maintenance routine, which can be performed in a timely and cost-effective
manner. To maximize HEPA filter life, be sure to change the pre-filter regularly. The Filter Change Light
will light up when filters need attention. Always make sure that the Air Scrubber is turned off when
removing the HEPA filters. Never use water to clean the HEPA filters. Use vacuum or clean cloth and
lay it flat on a clean, dry surface. When putting the HEPA filter back into the machine, make sure the
side with the gasket is facing the motor housing to prevent air leakage. HEPA35 fits X-3500; HEPA50
fits X-3400A & X-3700.
To Next Page
Loading...