XPower X-3400A - Additional Features; GFCI Daisy Chain; Filter Change Light

Addional Features
GFCI Daisy Chain for X-3400A
XPOWER X-3400A Air Scrubber is GFCI
daisy chainable with a low 2.8 amp draw.
The 12-amp on-board circuit breaker will
allow three (3) additional X-3400A units
to run on one circuit at the same time.
X-3400A Air Scrubber has an on-board
Circuit Breaker. If the Auxiliary Outlet
overloads, the Circuit Breaker will trip. If the
Breaker does trip, unplug the units and press the Circuit Breaker Reset button. Plug the units back
into the power source and turn on the switch.
Filter Change Light
The Red Filter Change Light will illuminate when
accumulated debris is over-saturated, and filter
needs to be changed.