1. To keep the Air Scrubber clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Air Scrubber with water.
3. When not in use, unplug and store the Air Scrubber in a dry indoor place out of reach of children.
4. Always disconnect the Air Scrubber from its power source before performing any maintenance or
cleaning.
- 11 -
X-3400A
3-STAGE FILTER SYSTEM
1st stage - Nylon Mesh Filter
2nd stage - Pleated Media Filter
3rd stage - 2" Thick HEPA Filter
X-3500
4-STAGE FILTER SYSTEM
1st stage - Outer Nylon Mesh Filter
2nd stage - Nylon Mesh Filter
3rd stage - Activated Carbon Filter
4th stage -1.4" Thick HEPA Filter
X-3700
4-STAGE FILTER SYSTEM
1st stage - Nylon Mesh Filter
2nd stage - Pleated Media Filter
3rd stage - Activated Carbon Filter
4th stage - 2" Thick HEPA Filter
Filter Systems
Maintenance
The XPOWER Air Scrubbers offer 3 models with different varieties of filter configuration to suit your
particular air filtration requirements. To help prevent cross-contamination between jobs, limit your
liability, and to optimize the performance of your air scrubber, you should perform a basic maintenance
routine between every use: decontaminate the entire unit inside and out, and replace the entire filter
system (both pre-filters and primary) before placing the unit on a new job.
Filters should be changed when they become so loaded with particles.
The air scrubber begins to reduce airflow and increase pressure drop.
Overly loaded filters not only restrict CFM, they can also result in a
loss of filtration efficiency. XPOWER Air Scrubbers include on-board
pressure sensors that automatically alert the Filter Change Light when
the filters need changing.
Important: Filter Maintenance and Replacement
Loaded Filter
To Next Page
Loading...