TRANSMISSION
2-SPEED TRANSMISSION
901305
SB M3x5
908262
SCH M2.5x12
983404
RP 4x4
903306
SFH M3x6
965070
C 7
981310
P 3x10
345592
SHIM 8x10x1.5
950812
BB 8x12x4
➊
➊
➋
➋
➌
➍
➍
➎
➎
Setscrews must NOT
protrude
Top of screw head
should be level with
hole bottom edge
NOTE
ORIENTATION
NOTE
ORIENTATION
2ND GEAR
2ND GEAR
1ST GEAR
1ST GEAR
NOTE
ORIENTATION
NOTE
ORIENTATION
NOTE
ORIENTATION
➊
➋
➌
Do not overtighten gap-setting
setscrews. Only tighten until roller
pins contact the center hub.
Use white paint to color the top of ONE screw head. This will allow you to identify the two
different screws - one white, one dark - when you are adjusting the shift point.
ONE-WAY LUBE
SHIFT-POINT SCREW
SHOE-GAP
SETSCREW
BEARING OIL
BEARING OIL
Use HUDY Reamer #107600 to slightly chamfer
the edges on all 3 holes for screws from inside.
Use HUDY Reamer #107600 to slightly chamfer
the edges on all 3 holes for screws from inside.
ASSEMBLED VIEW
3. REAR TRANSMISSION
55
55
59
59
To Next Page
Loading...
