EasyManua.ls Logo

Xray X1 - Page 21

Xray X1
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
2x
2x
Add oil in each slot of the COMPOSITE side tubes.
NOTE:
Add oil only in the slots, not on the whole tube.
After assembling the side tubes, check for smooth operation.
It is very important to re-oil the side tubes, at least once per race day.
You may use different oil thicknesses depending on track conditions.
OIL
For HIGH grip use SOFTER oils
For LOW grip or ASPHALT use HARDER oils
2. REAR SUSPENSION
The angle of the side tubes has a fine effect on car performance.
The angle is adjusted with shims between the pivot ball and the rear
brace and/or upper plate.
The HIGHER the angle, the stiffer it feels and the less it rolls.
The LESS (flatter) the angle, the softer it feels and the more it rolls.
SIDE TUBE ANGLE
SHIM
SHIM
SHIM
HUDY OILS
#106510 10.000cSt OPTION
#106492 11.000cSt OPTION
#106512 12.000cSt OPTION
#106515 15.000cSt OPTION
#106520 20.000cSt OPTION
#106530 30.000cSt INCLUDED
#106540 40.000cSt OPTION
#106550 50.000cSt OPTION

Related product manuals