25
DETAIL
The axle must have a VERY small amount
of side play. If there is no side play, the axle
may bind and damage the ball-bearings.
IMPORTANT
#374901
XRAY GEAR DIFFERENTIAL 1/10 FORMULA - SET
9g lighter for great weight savings and improved
acceleration, but more fragile.
#375010
GRAPHITE REAR AXLE SHAFT
#375001
XRAY SOLID AXLE 1/10 FORMULA - SET
BEARING OIL
(HUDY #106230)
BEARING OIL
(HUDY #106230)
OIL
OIL
3. BALL DIFFERENTIAL
FLANGED
FLANGED
951438
BB 1/4“x3/8“x1/8“
375090
6.4x8.4x1.0
375090
6.4x8.4x2.0
375090
6.4x8.4x0.5
908258
SCH M2.5x8
These eccentric bushings adjust the RIDE HEIGHT of the rear pod.
Make sure to use the SAME eccentric bushings on BOTH sides.
REAR RIDE HEIGHT ECCENTRIC BUSHINGS
INITIAL SETTING
ORIENTATION
UPPER
1.5
1.5
2.0
2.0
2.5
2.5
1.0
1.0
0.5
0.5
0
1.0 ORIENTATION UPPER
1.0 ORIENTATION UPPER
Use additional shims to widen the rear track-width.
Use the same shims on both sides. For initial
assembly use 6.4x8.4x2mm shims.
To Next Page
Loading...
