Xray X12 - Page 25

25
INITIAL SETTING
Note the orientation of servo saver when
servo is in neutral.
90º
902304
SH M3x4
5. FINAL ASSEMBLY
F = 25T H = 24T K = 23T
Use the adapter that matches the steering servo.
SERVO SAVER
Servo Screw
Servo Screw
(NOT INCLUDED)
(NOT INCLUDED)
CENTER
CENTER
DETAIL
Make sure to center the servo saver along
the chassis centerline.
To better see the chassis centerline, there
is a small mark on the chassis.
VIEW
VIEW