Xray X12 - Battery Mounting Positions

30
VIDEO TECH TIP
▶
BATTERY MOUNTING
SYSTEM
BATTERY MOUNTING POSITIONS
5. FINAL ASSEMBLY
Disconnect the shock absorber and
position the pack at an angle to
clear the surrounding brackets when
installing or removing the battery.
ORIENTATION
The X12 has 4 battery positions. The further forward the battery is positioned in the car, the easier it will be to drive but less responsive.
The further rearward the battery is located, the more aggressive it will feel with more steering.
BATTERY
BATTERY
BATTERY
Battery Pack
(NOT INCLUDED)
INITIAL SETTING
= Easiest to drive
= Easiest to drive
= Easiest to drive
Position
Position
Position
1
2
3
4
1
2
3
4
1
2
3
4
DETAIL
BATTERY BACKSTOP
The new adjustable battery backstop system secures the battery
in the car in a tweak-free, non-fixed manner to help improve
traction and makes it more stable and easier to drive.
It is very important that battery has a very small amount of play
in all directions so it does not tweak the car, but the play cannot
be too much otherwise the battery may fall out in crashes.
Adjust the shim thickness to match battery pack height. If there
is no play between the backstop and pack, use a thicker shim. If
it is too loose, use a thinner shim to reduce the gap.
[note] Make sure to keep a small amount of play
Make sure to have a small
amount of play
903310
SFH M3x10
960031
ALU N M3
ALU NUTS M3
#296530-B BLUE OPTION
#296530-B BLUE OPTION
#296530-B BLUE OPTION
#296530-K BLACK OPTION
#296530-K BLACK OPTION
#296530-K BLACK OPTION
#296530-O ORANGE OPTION
#296530-O ORANGE OPTION
#296530-O ORANGE OPTION
#960031 SILVER INCLUDED
#960031 SILVER INCLUDED
#960031 SILVER INCLUDED