Xray X12 - Page 9

9
0.5º
2º
1º
2x
The
DOT
must be oriented
towards
OUTSIDE
.
The
DOT
must be oriented
must be oriented
towards
OUTSIDE
.
(INITIAL SETTING) (INITIAL SETTING)(INITIAL SETTING) (INITIAL SETTING)
INCLUDED INCLUDEDINCLUDED INCLUDEDOPTION OPTIONOPTION OPTION
1. FRONT SUSPENSION
NOTE ORIENTATION
NOTE ORIENTATION
NOTE ORIENTATION
CAMBER ADJUSTMENT
EU Edition kits include the 1.5º kingpins; US
Edition kits include the 1.0º kingpins. These are
the recommended start points for low to medium
grip (EU) or high grip (US) conditions. Optional
kingpins are available to adjust camber if needed.
DECREASING THE CAMBER ANGLE
will decrease the steering which will make the car easier
to drive and also helps to prevent traction rolling.
VIEW
1 DOT
1 DOT
1 DOT
1 DOT
3 DOTS
3 DOTS
3 DOTS
3 DOTS
2 DOTS
2 DOTS
2 DOTS
2 DOTS
4 DOTS
4 DOTS
4 DOTS
4 DOTS
1.5º
1.5º
1º
2º
0.5º
INCREASING THE CAMBER ANGLE
will increase the car steering, however, will make the
car more difficult to drive.
C
A
M
B
E
R
C
A
M
B
E
R
903308
SFH M3x8
960031
ALU N M3
CAMBER - KING PIN AXLE
#372285 0.5º 4 DOTS OPTION
#372285 0.5º 4 DOTS OPTION
#372285 0.5º 4 DOTS OPTION
#372285 0.5º 4 DOTS OPTION
#372282 1º 3 DOTS INCLUDED
#372282 1º 3 DOTS INCLUDED
#372282 1º 3 DOTS INCLUDED
#372282 1º 3 DOTS INCLUDED
#372283 1.5º 1 DOT INCLUDED
#372283 1.5º 1 DOT INCLUDED
#372283 1.5º 1 DOT INCLUDED
#372283 1.5º 1 DOT INCLUDED
#372284 2º 2 DOTS OPTION
#372284 2º 2 DOTS OPTION
#372284 2º 2 DOTS OPTION
#372284 2º 2 DOTS OPTION
ALU NUTS M3
#296530-B BLUE OPTION
#296530-B BLUE OPTION
#296530-B BLUE OPTION
#296530-K BLACK OPTION
#296530-K BLACK OPTION
#296530-K BLACK OPTION
#296530-O ORANGE OPTION
#296530-O ORANGE OPTION
#296530-O ORANGE OPTION
#960031 SILVER INCLUDED
#960031 SILVER INCLUDED
#960031 SILVER INCLUDED