Need help?Do you have a question about the XT Racing GPX Pro and is the answer not in the manual?
General| Laptimer | Yes |
|---|---|
| Datalogging | Yes |
| Water Resistance | IP67 |
| Display | LCD |
| Power Source | Rechargeable battery |
| Memory | Internal memory |
Mode for tracks with multiple laps, featuring start/finish lines and lap timing.
Guides on selecting drag race types and starting methods, including accelerometer use.
Details on connecting expansion cables, power sources, and signal types.
Summarizes the wiring connections for Cable A, detailing wire functions.
Summarizes the wiring connections for Cable B, detailing wire functions.
Step-by-step guide for physically installing the GPX Pro's external cables.
Explains the use of Scotchlok connectors for vehicle wiring without stripping wires.
Details how to perform the initial setup for data acquisition through the menu.
Details common inputs for data acquisition, such as RPM and throttle position.
Explains how to capture and configure RPM data using direct or coupled methods.
Details calibration for acceleration and lateral G-force readings using the accelerometer.
Details how to set up alarms for temperature and switch inputs.
Options for managing stored sessions, tracks, and deleting files.
Guides on connecting the GPX device and downloading sessions to XTStudio.
Explains the process of downloading recorded sessions from the GPX to the XTStudio database.
Explains how to configure data acquisition inputs within XTStudio.
Describes the process of analyzing recorded data using XTStudio features.
Details the track map feature for visualizing lap data and comparing performance.
Explains track map zoom and offset features for detailed analysis.
Details how to graph and analyze captured data, with options for multiple variables.
Displays detailed information for comparison items in a bar format.
Displays data in circular gauge format, allowing multiple gauges per bar.
Introduces the GPX Pro screen designer for customizing device displays.
To Next Page