Need help?Do you have a question about the XTA DP424 and is the answer not in the manual?
General| Input Channels | 4 |
|---|---|
| Crossover Filters | Butterworth, Linkwitz-Riley, Bessel |
| Connectors | XLR |
| Network | Ethernet |
| Frequency Response | ±0.5dB 20Hz – 20kHz |
| EQ Filter Types | Parametric, Shelving |
| Crossover Slopes | 6, 12, 18, 24, 30, 36, 42, 48 dB/octave |
Step-by-step guide for initial setup, including crossover design and parameter adjustment.
Describes pre-configured routing setups for system design assistance.
Details the range and steps for adjusting input gain.
Explains the input delay function and its adjustable units.
Describes the 28-band graphic EQ and its 'Q' shape settings.
Details the eight bands of parametric EQ and available filter shapes.
Details the range and steps for adjusting output gain.
Explains how to switch the polarity (phase) of each output channel.
Explains the output delay function and its adjustable units.
Details the standard RS232 interface for PC connection and its limitations.
Illustrates the physical setup for connecting a single unit via RS232.
Explains setting lock types for individual parameter groups and overall access.
Details the process of entering a password after selecting a lock type.
Explains the 'GQ600' and 'Special' behaviour modes for the graphic equaliser.
Details parameters and automatic time constant settings for the program limiter.
To Next Page
