Need help?Do you have a question about the XTA DP444 and is the answer not in the manual?
General| Input Channels | 4 |
|---|---|
| Output Channels | 4 |
| Frequency Response | 20 Hz - 20 kHz, ±0.5 dB |
| EQ Types | Parametric, Notch |
| Input Impedance | >10 kOhms |
Lists the main menu categories including Global Memory, Input, Crossover, Interface, System, Security, and AES/EBU options.
Crucial safety guidelines for operating the equipment, including electrical safety and environmental concerns.
Highlights the main functionalities, including audio quality, flexibility, DSP power, and delay capabilities.
Detailed explanation of the LCD screen, control keys, encoders, LEDs, and input/output sections.
Guides through the unit's start-up sequence and preliminary configuration steps.
Details on using graphic and parametric EQ for input channels, including filter types.
Instructions for setting output gain, polarity, and delay for precise signal management.
Explains the function and adjustment of the program limiter and the "D-Max" clip limiter for output protection.
Details the RS232 interface setup for single unit control via a PC, including cable requirements.
Details how to configure and use the AES digital inputs and outputs for digital audio transmission.
Describes various lock types to restrict access to parameters and functions, including User Specific options.
Details the procedure for entering a four-digit password to activate security lock settings.
How to unlock the unit using a previously set code or by following an override procedure.
Instructions for recovering access if the unit password is forgotten, involving a break code.
Explains the program limiter, its parameters, and automatic time constant settings based on HPF frequency.
To Next Page
