XTCERA X-MILL 500 - Chapter 1: Introduction to X-Mill 500 Five-Axis Dental Milling Machine; 1-1 Product Introduction; 1-2 Shape Structure

X-mill 500 is the five-axis dental milling machine developed by Shenzhen Xiang-
tong Medical Technology Co., Ltd. It adopts the horizontal integrated design. Key
machinery and control components are high-quality imported components. The
specially developed control system features high speed, high precision and high
intelligence. The system can automatically select best processing parameters
based on materials and customer processing requirements, and uses multiple intel-
ligence and protection procedures.
X-mill 500 can complete one-button operation, automatically replace the bur in
the entire process, automatically detect the length of the bur, automatically correct
the bur, and has eight burs. The maximum speed of spindle can be up to 60000 rpm,
which is extremely strong, accurate, and reliable.
The machine has strong adaptability and selects different processing strategies
according to the type of materials and tooth crowns, to meet diverse needs of differ-
ent users and different products.
(Select processing strategies strictly in accordance with training require-
ments. Processing strategies vary with different materials. Please con-
tact our technical staff before material replacement)
CHAPTER 1: INTRODUCTION TO X-MILL 500 FIVE-AXIS DENTAL
MILLING MACHINE
1-1 PRODUCT INTRODUCTION
1-2 SHAPE STRUCTURE
Right side
Power
switch
Cooling water inlet
Flush interface
Water pump power supply
Switch power supply
Vacuum cleaner power supply
USB interface
Network interface
Cooling water outlet
interface
outlet
interface
Back side
Air inlet
power