TR300 Treadmill
13
The Pulse (Heart Rate) readout will display your current heart rate in beats per minute
during the workout. You must use both stainless steel sensors on the side hand rails to
display your pulse. Pulse value displays anytime the upper display is receiving a Pulse
signal.
Pulse Grip Feature
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of dierent exercise sessions, which
cannot be used for medical purposes.
Calorie Display
1. Display will automatically turn o (go to sleep) after 5 minutes (no key operations). The
treadmill will draw very little current in sleep mode (about as much as your television when
it is turned o).
2. Remove tether cord.
3. Turn o the main switch on the front of the treadmill, below the motor cover.
To Turn Treadmill O
To Next Page
Loading...
Need help?
General
