Recommendation
We recommend using the safety switch to prevent the pump from
operating idly (without water).
1. Technical specification
2. Use
The garden pump is a device which automatically turns on and off according
to the system pressure due to the supply tank which ensures continuous
water supply. The pump draws water in using the suction piping. When the
maximal pressure is reached (the tank is fully filled), the pump turns off
automatically. The system pressure may be observed on the pressure gauge.
The device automatically turns on and supplies the system with water in case
the pressure drops to the limit values.
The garden pump is designated for household, cottage and garden use in a
temperature higher than 5°C. It shall not be used for any purposes which do
not match its technical specification. The pump is suitable for the following
purposes:
- garden and field irrigation
- household water supply
- pressure increase with household water supply
- Liquid pumping – clean service water, clean rainwater
Max.suction hight:
Max.transport hight:
Max.transport volume:
Max.liquid temperature:
To Next Page
Loading...