To Next PageTo Next Page
Need help?Do you have a question about the XTM Racing Mammoth ST and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Drivetrain | 4WD |
| Power Source | Electric |
| Chassis Material | Plastic |
| Motor Type | Brushed |
| Battery | 7.2V NiMH |
Crucial safety precautions related to the nitro engine operation.
Safety guidelines for handling and using nitro fuel.
Broad safety advice applicable to the entire RC vehicle operation.
Lists optional upgrade parts available for customization.
Guidance on selecting the appropriate fuel for the engine.
Explains the necessity and use of a fuel bottle.
Details the tool needed for glow plug maintenance.
Describes the device used to start the engine's glow plug.
Advises on having spare glow plugs for engine operation.
Explains the functions and parts of the Hitec Aggressor radio system.
Identifies key mechanical and structural parts of the truck.
Instructions for completing the initial physical assembly of the truck.
Procedure for ensuring radio system functionality and range.
Verifying the proper operation of steering and throttle/brake functions.
Identifies the parts of the engine's carburetor.
Details how to adjust the idle stop screw for proper idling.
Explains the function and adjustment of the high-speed needle valve.
Explains the function and adjustment of the low-speed needle valve.
Instructions on how to safely fill the fuel tank.
Procedure for preparing the engine for starting.
Step-by-step guide to starting the nitro engine.
Advises on suitable fuels and glow plugs for break-in.
Detailed steps for properly breaking in the new engine.
Guidance on adjusting needle valves for optimal performance after break-in.
Instructions for cleaning and re-oiling the air filter element.
Procedures for glow plug care and using after-run oil.
Regular maintenance tasks for the engine and chassis.
How to properly set and adjust the truck's brake system.
Adjusting wheel alignment for steering characteristics.
Modifying tire angle for surface contact and handling.
Fine-tuning when the transmission shifts gears.
Adjusting suspension stiffness and ride height.
Modifying shock oil and springs for terrain handling.
Tuning differential action for turn performance.
Cleaning and maintaining the air filter.
Regular inspection of screws, linkages, and bearings.
Ensuring the fuel lines and batteries are in good condition.
Proper setting of gears for smooth drivetrain operation.
Solutions for common issues with the radio control system.
Diagnosing and fixing problems with the nitro engine.
Addressing common issues related to the truck's chassis and drivetrain.
Visual breakdowns of the truck's components for assembly/disassembly.
Visual catalog of individual spare parts with numbers.
Various shock springs and related parts for tuning.
Upgrade parts for the drivetrain and transmission.
Parts for tuning differentials and suspension geometry.
Optional parts for engine performance and fuel delivery.
Details on warranty period, coverage, and service procedures.
Specific instructions for warranty claims on the radio system.
