Page 3
in your kit or require additional information, please contact your local distributor at the address below:
XTM Racing guarantees this kit to be free from defects in both material and workmanship, at the date of purchase. This does not cover any component parts damaged by
In no case shall XTM Racing's liability exceed the original cost of the purchased kit.
In North America:
Global Services
18480 Bandilier Circle
Fountain Valley, CA 92708
Phone: (714) 963-0329
Fax: (714) 964-6236
Email:
service@globalhobby.net
In Europe:
Ripmax Ltd.
241 Green Street
Phone: (0) 20 8282-7500
Fax: (0) 20 8282-7501
Email:
xtm@ripmax.com
CUSTOMER SERVICE INFORMATION
INTRODUCTION
POPULAR OPTION PARTS
XTM Racing produces a number of popular option parts for your X-Terminator 2 RTR Nitro Buggy. Please see page 61 for a complete
list of current option parts. New option parts are always in the works, so check our website often at www.teamxtm.com.
2-Speed Transmission
7075 Steering Hubs
7075 Hub Carriers
Titanium Turnbuckles and Tie-Rods
7075 Front and Rear Shock Towers
Carbon Fibre Radio Plate
Buggy is ready to tear up the terrain and carve through the curves with ease. Designed
with adjustable camber, adjustable toe-in, and adjustable bump steer, the X-Terminator 2
RTR Nitro Buggy is prepared to take on the different surfaces it encounters.
Included are factory-installed beefy 5mm braces to support the front and rear gear
boxes, a mega high-torque metal-geared steering servo, and a steel drive-train to
and the X-Terminator 2 RTR Nitro Buggy is sure to create the 1/8 scale enjoyment that
These Operating Instructions are designed to help you get your new X-Terminator 2 RTR
Nitro Buggy running as quickly as possible. Included is information on taking
section and a complete parts list with detailed exploded view assembly drawings.
handy for future reference.
To Next Page
Loading...
