16 17
Item Remark Pre-operation
check (daily)
Initial 1 month or
6 hours
Every 3 month
or 12 hours
Every 6 month or
24 hours
Every 12 month
or 48 hours
Spark plug
Check condition
Adjust gap and clean
Replace if required
Engine oil
Check oil level
Replace
Air filter
Clean
Replace if required
Fuel Tank
filter
Clean fuel tank filter
Replace if required
Valve
clearance
Check and adjust when
engine is cold
Fuel line
Check fuel hose for
cracks or damage
Replace if required
Exhaust
system
Check for leakage
Tighten or replace
gasket if required
Check exhaust screen
Clean and replace if
required
Carburettor Check choke operation
Fittings/
Fastenings
Check all fittings and
fixtures and tighten if
required
Now that you have purchased your tool, should a need ever exist of repair or service, simply contact your nearest Authorised
Service Centre or other qualified service organisation. Be sure to provide all pertinent facts when you call
or visit.
Call Smart Marketing Group for your closest centre
Aust. 1300 660 457 N.Z. 0800 474 876.
MAINTENANCE CHART
SERVICE
To Next Page
Loading...
Need help?
General