11
SHORT press on the F button four times
This turns the Scan feature ON or OFF
Options are oS (Scan ON) or GS (Scan OFF)
When Scan option is turned ON – Short pressing S button on the faceplate will make the
radio scan through all 80 channels until it hears a channel that has trafc on it. Scan will
stop on Channels with trafc and continue to scan again when channel goes quiet.
DEFAULT SCN Setting is ON
SHORT press on the F button to step onto the next Menu Feature
MENU FEATURES
SCN Scan (GLOBAL SETTING)
SHORT press on the F button ve times
This disables the transmitter from operating on channels that are busy with Trafc at the
time you push the PTT button on the microphone. This option is rarely needed – Use
caution when setting this option!
This option needs to be set on EACH Channel that you want the BCL option turned on
Options are oF (BCL OFF) or on (BCL ON)
Use the ▲ & ▼ Arrow buttons on the faceplate to select the required Channel 01 → 80 to
change BCL settings on.
SHORT press on the F button ve times
Use the ▲ & ▼ Arrow buttons to select oF (BCL OFF) or on (BCL ON)
Long Press F button to save the changes & exit programming for this channel
This needs to be FULLY repeated for EACH Channel 01 → 80 that you wish to turn
ON the BCL function for.
DEFAULT BCL Setting is OFF on ALL 80 channels
SHORT press on the F button to step onto the next Menu Feature
BCL Busy channel lockout (PER CHANNEL SETTING)
SHORT press on the F button 6 times
This sets the Tone melody that is played when you press the CALL button on the
microphone
There are 5 selectable tone melodies C1 → C5
Use the ▲ & ▼ Arrow buttons on the faceplate to select the desired tone melody
C1 → C5 , As selections are made the radio will play a short demo of the selected tone
melody.
DEFAULT CAL Setting is C1
SHORT press on the F button to step onto the next Menu Feature
CAL Call ring tone (GLOBAL SETTING)
SHORT press on the F button seven times
This turns ON or OFF the End of Transmission (EOT) Tone (Roger Beep) that is
transmitted immediately after you release the Push To Talk button of the microphone – It
is used to indicate to other users that you have nished your transmission.
Options are oF (RBP OFF) or on (RBP ON)
Use the ▲ & ▼ Arrow buttons on the faceplate to select oF (RBP OFF) or on (RBP ON)
DEFAULT RBP Setting is OFF
SHORT press on the F button to step onto the next Menu Feature
RBP Roger beep (GLOBAL SETTING)
To Next Page
Loading...