Need help?Do you have a question about the Xtralis Vesda System and is the answer not in the manual?
General| Detection Principle | Detecting minute particles of combustion |
|---|---|
| Sampling Method | Aspirated air sampling |
| Alarm Levels | 4 programmable alarm levels (Alert, Action, Fire 1, Fire 2) |
| Pipe Network Length | Up to 200 meters per pipe |
| Power Supply | 24 VDC (typically), some models support wider voltage ranges |
| Communication Ports | RS-485, Ethernet, relays |
| Operating Temperature | 0°C to 39°C (32°F to 102°F) |
| Operating Humidity | 10% to 95% RH (non-condensing) |
| Approvals | VdS |
Details the function and importance of the pipe network in collecting air samples for detection.
Covers various VESDA detector types, including standard and special purpose models.
Describes Xtralis VSC and VSM4 software for system configuration, management, and monitoring.
Explains the VESDAnet fault-tolerant, bidirectional communication system connecting devices.
Outlines how VESDA systems integrate with external Fire Alarm Control Panels and building management systems.
Lists recognized international approval agencies for VESDA Products, indicating compliance.
To Next Page