Xtreme Garage Quiet-Drive 425-1656 User Manual

Owner’s Manual
● Please read and understand this manual and safety instructions carefully before installation.
● The Opener WILL NOT CLOSE until the Photo Eye Safety System is properly installed and aligned.
See page 14, 15.
● The Opener WILL NOT OPERATE until opener is programmed. See page 16, 17, 18.
● REGULARLY CHECK and TEST the Opener according to the safety label to ENSURE SAFE OPERATION.
● Retain this manual for future reference.
Serial # ___________________ Date Installed __ __ /__ __ /__ __ __ __
GDO Manual Revised: 4-12
For serial # 5555555 and later
For Use With Residential Sectional Garage Doors Only
GARAGE DOOR OPENER MODEL: 425-1656
HANDLES DOORS 18 FT. WIDE & UP TO 7FT.TALL
MNOMU04A-2
R
NOTICE: This opener will not work until you set the travel limits and the auto
force adjustment. You must follow all steps located on pages 16,17,18.
Soft Open / Soft Close Feature: The opener is designed to start slowly,
accelerate to full speed, then slowly stop. The soft open/close is designed to
reduce strain on the openers components and to improve opener longevity.
www.gdohelp.com
1-877-GDO-4402
1-877-436-4402

Xtreme Garage Quiet-Drive 425-1656 Specifications

General

Brand	Xtreme Garage
Model	Quiet-Drive 425-1656
Category	Garage Door Opener
Language	English

Summary

Inventory

Preparation

Tools and Additional Parts Required

Rail and Trolley Assembly

Installing the Belt

Mounting Header Bracket

Attaching Rail to Header Bracket and Mounting Door Bracket

Mounting Opener to Ceiling

Attaching Door Arms

Installing Light and Emergency Release Knob

Wiring Instructions

Connecting Photo Eye Safety System

Connecting Power

Aligning the Photo Eye Safety System

Travel Limit Adjustment—I. UP Limit

Setting UP Limit

Step-by-step programming for the door's upper travel limit.

Travel Limit Adjustment—II. DOWN Limit

Setting DOWN Limit

Step-by-step programming for the door's lower travel limit.

Auto Force Adjustment

Auto Force Adjustment Procedure

The specific steps to automatically measure and set door opening and closing forces.

Connecting Wall Panel

Final Adjustments and Testing

Testing the Safety Reverse System

How to verify the door reverses correctly when encountering an obstruction.

Testing the Photo Eye Safety System

Verifying the proper function and alignment of the safety photo eyes.

Programming Hand-held Transmitter

To Program Transmitter(s)

Instructions on how to add new remote transmitters to the opener's memory.

Programming Wireless Keyless Entry Pad

To Add Personal Codes

Steps for adding new access codes to the keyless entry system.

Operating the Opener

Activating the Opener

Explains how to use the Wall Panel, Hand-Held Transmitter, and Keyless Entry.

Manual Door Operation

Procedures for manually operating the door in case of power failure or disconnection.

Maintenance

Troubleshooting

Repair Parts

Rail Assembly Parts

Part numbers and descriptions for components of the opener's rail system.

Installation Parts

Part numbers and descriptions for hardware used during the opener installation.

Accessories

Part numbers and descriptions for optional accessories like photo eyes and wall panels.

Opener Assembly Parts

LIMITED WARRANTY AND LIMITATION OF LIABILITY

REGISTRATION CARD

A form for registering the product to activate the warranty.