Operation Manual5
Introduction
This Operation and Safety Manual provides the information
needed to safely operate the XR3034 Reach Forklift.
This manual shall be considered a permanent part of the fork-
lift, and kept in the protective manual case located in the op-
erator’s cab.
Before operating the forklift, read this manual complete-
ly and carefully to understand the safety instructions and
the operation of controls and safety equipment. You must
comply with all DANGER, WARNING, and CAUTION notic-
es. They are for your benet.
Improper operation of this forklift could result in death or
serious injury.
BEFORE starting the engine, do the following:
• Read the Operation and Safety Manual
• Read all the Safety Labels on the Forklift
• Clear the area of all other persons
Learn and practice safe use of forklift controls in a safe,
clear area, BEFORE you operate this forklift on a work site.
It is your responsibility to observe applicable laws and
regulations and to follow manufacturer’s instructions on
forklift operation and maintenance.
Replacement manuals for the XR3034 Reach Forklift can be
obtained by contacting our parts department by phone or
visiting our website:
Xtreme Manufacturing
Phone: (800) 497-1704
www.XMFG.com
When contacting our parts department, please have the
forklift serial number available. The serial number plate is
located in the operator’s cab, at the base of the seat.
For easy reference, you can record the serial number in the
space below.
Serial Number:
Warning
Notice
FRONT
REAR
RIGHT
LEFT
General
Replacement Manuals
Model / Serial Plate
Forklift Direction Orientation
Introduction
Fig 1. Serial Number Plate
Right side, left side, front, and rear are directional references
given from the operator’s seat when facing forward.
To Next Page
Loading...
Need help?
General
