ahead. Depending on the room some speakers may
sound better when angled, others may not.
Try to keep cables as short as possible. According
to the electrical parameters, a long conductor will
have a bigger influence on the sound than a short
one. It may even work as an antenna, picking up
noise and electromagnetic fields, causing
disturbing hum etc.
Make sure all connectors are clean and not
oxidized. All connections should be mechanically
stable, both power, signal and speaker cables.
Signal cables should be separated from cables
carrying large currents.
Please remember that good sound reproduction is a
matter of personal preference. You have to
experiment and try different settings to achieve it.
We wish you the best of luck!
To Next Page
Loading...
