EasyManuals Logo

XTZ 99.26 P User Manual

XTZ 99.26 P
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Page: 7
Cables
Try to keep them as short as possible. By its
electrical parameters, a long conductor will have a
bigger influence on the sound than a short one. It
may also work as an antenna and thus receive
various signals that may become a consta
nt noise in
an active subwoofer.
Make sure that all connections are clean and not
oxidized. All connections should be mechanically
stable, both power, signal and loudspeaker cables.
Signal cables should be separated from other
cables.
Front speakers
To get the best result the front speakers should be
placed symmetrical in front of the listener. The
distance between the front speakers should be
around 80% of the distance to the listener. In other
words, the recommended angle between the front
speakers should be 45°.
Why use 2
Subwoofer
There are more then one
benefits of having 2
subwoofers instead of one.
The sound pressure level will be higher.
Less dips and standing waves in the room and a
better frequency response in the room (and on
sweet spot)
The need of power is less, to reach the same SPL as
with one subwoofer
Finally
Please remember that good sound is a matter of
taste, so you have to experiment to obtain your
favourite one.
We wish you best of luck!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the XTZ 99.26 P and is the answer not in the manual?

XTZ 99.26 P Specifications

General IconGeneral
BrandXTZ
Model99.26 P
CategorySpeakers
LanguageEnglish

Related product manuals