XTZ 99 W12 DSP User Manual

17 / 26
Function 16
OUTPUT / Polarity
Select polarity.
Select: Negative or Positive
Here you can select the polarity.
You can select either: Negative or Positive.
Function 17
OUTPUT / Phase 1st Ord.
Phase.
The phase adjusts from 0 - 180 degrees.
Incorrect phase alignment between the main
loudspeakers and subwoofer causes a drop in the
frequency response of the whole system at the
crossover frequency. The graphs to the right (Fig. 1)
show the effect of phase difference to the frequenc
y
response. The phase difference between the main
loudspeakers and subwoofer at the listening
position is dependent upon the position of the
subwoofer, so the phase adjustment should be done
only after the preferred position is found.
One step = 1 degree

XTZ 99 W12 DSP Specifications

General

Brand	XTZ
Model	99 W12 DSP
Category	Subwoofer
Language	English