Need help?Do you have a question about the XTZ SUB 12.17 and is the answer not in the manual?
General| Driver Size | 12 inches |
|---|---|
| Amplifier Power | 500 W RMS |
| Type | Active Subwoofer |
| Phase Adjustment | 0 - 180 degrees |
| Enclosure Type | Bass Reflex |
| Crossover Frequency | 40 - 160 Hz |
| Inputs | RCA, XLR |
Details the company's philosophy, goals, and contact information.
Lists the key technical specifications and capabilities of the subwoofer.
Information on the removable cloth grill and its aesthetic options.
Preliminary steps and considerations before installing the subwoofer.
Guidance on using high-quality shielded coaxial cables for RCA connections.
Advice on using high-quality balanced XLR cables and potential issues.
Factors influencing optimal subwoofer placement for sound quality.
Recommendations for general subwoofer placement strategies in a room.
Connecting the subwoofer for home theater receiver/processor setups.
Connecting with pre-amps that manage crossovers internally.
Connecting for music systems using full-range signals.
Connecting with systems lacking internal crossover or bass management.
Guidance on connecting multiple subwoofers using pass-through or Y-cables.
Using automated setup routines on receivers/processors for calibration.
Manual calibration steps for older receivers/pre-amps without automated setup.
Adjusting bass characteristics using port plugs for different frequency responses.
Port configuration for increased output in the higher frequency range.
Port configuration for increased output in the mid-frequency range.
Port configuration for increased output in the lower frequencies.
Port configuration for a dry and controlled bass character.
Using the EQ switch to select different sound characteristics (REF, EQ1, EQ2).
Description of RCA input options for signal connection.
Explanation of the balanced XLR input for LFE signals.
Functionality for passing XLR signals to other subwoofers.
Direct access port for amplifier programming (not for consumers).
Adjustable control for setting the subwoofer's upper frequency response.
Phase adjustment to synchronize subwoofer output with main speakers.
Control for adjusting the subwoofer's output level to match main speakers.
Switch to cut high frequencies, recommended to turn off for LFE signals.
Switch to select between different EQ characteristics.
Functionality for automatic power on/standby based on audio signal presence.
Explanation of the LED indicator colors and their meanings.
The main on/off switch for the subwoofer unit.
Recommendations for cleaning the subwoofer's cabinet and baffle.
Instructions for cleaning the removable speaker grill.
Guidelines for cleaning the subwoofer's drive units (woofers).
Important warnings regarding protection circuitry and long-term excessive volume use.
A step-by-step guide to diagnose and resolve common subwoofer issues.
List of situations that necessitate professional service by a qualified technician.
Driver size, anechoic response, crossover, phase, amp power, and impedance.
Available inputs, outputs, and AC power requirements.
Product dimensions, weight, and warranty duration.
Guidance on self-service and part replacement for common issues.
Advice on handling defective parts and warranty claims.
Instructions on how and where to send products for warranty repair.
Contact information and procedures for obtaining installation or operational support.
To Next Page
