EasyManua.ls Logo

Xview XV20DVR - Troubleshooting

Xview XV20DVR
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
13. TROUBLE SHOOTING
Problem: The adhesive mount will not stay attached to the
windscreen
Solution: • Ensure windscreen is clean and free of debris,
use glass cleaner or an alcohol swab to clean.
• Ensure that the plastic film has been removed from the
adhesive pad.
• When mounting hold the bracket firmly to the windscreen for
at least 60 seconds.
Problem: The Dash Cam will not power on
Solution: • Vehicle Accessory Socket - Check the vehicle
accessory socket has power, simply plug another device and
see if it powers up (or use a test light / multimeter to check for
power).
• Dash Cam Power Cable - Check the fuse in the tip of the
accessory plug, it may need to be replaced.
• Dash Cam - Connect the Dash Cam to a computer via the
USB cable to see if it powers up.
Problem: The Dash Cam shuts down when connected to the
vehicle and the battery will not charge
Solution: • This dash cam does not have a battery, it has a
Super Capacitor.
• The dash cam will only turn on when the vehicle is switched
on.
Problem: The Dash Cam battery only lasts for a few minutes
when power is disconnected
Solution: • This dash cam does not have a battery, it has a
Super Capacitor.
• The Super Capacitor only holds enough power to safely shut
down the dash cam, securely save the last file when power is
disconnected and retain settings.
• The Dash Cam is designed to be connected to power at all
times while being used.