XVision X2RxN - Page 13

10
4.2.1.1.2 Live
Go to “Main Menu” → “Display” → “Live”
4.2.1.1.3 Output
Go to “Main Menu” → “Display” → “Output”
 Video Output：Live Output
 Seq Mode：Set sequence mode
 SEQ Dwell Time：Sequence dwell time
is set 5 seconds by default. User may set
it as required.
 VGA/HDMI Resolution：VGA output or
HDMI output. supports 1024×768 ，
1280×1024 ， 1440×900 ， 1280×720，
1920×1080
 Transparency：Set the transparency of
the menu in the range of 0—128.
 Channel：Select channel number.
 Show Time：Tick the checkbox to display time.
 Channel Name：Name marked on the IPC.
 Date Format：Set date format such as d/m/y or
m/d/y.
 Time Format：12 hour or 24 hour.
 OSD Position：set the position of IPC name and
time.
 Color：Adjust the Chroma, brightness, contrast
and saturation of the IPC of the channel.