Xyron Mega Runner
®
Adhesive Applicator 10
Helpful Tips
General Tips:
• Our runner requires a slower motion to ensure the
dots have enough time to release from the plastic liner.
• Keep adhesive tip level and apply even pressure for a
full strip of adhesive.
• If plastic liner loops outside the cartridge when you pull
your applicator off the item, use the tightening feature
built into the cartridge to solve the problem. Remove
the cartridge from the applicator and tighten by turning
the top knobs clockwise with your fingers.
• Store your applicator and cartridges in a cool, dry
place.
• Use a variety of materials: paper, cardstock, vellum,
fabric, ribbon, twine, craft foam, tissue paper, wood,
buttons, acrylic, photos, paper owers, thin metal
sheets, and newspaper.
• Remove excess adhesive with your nger or Xyron
®
Adhesive Eraser (sold separately).
Fabric Tips:
• Wash sizing from fabric.
To Next Page
Loading...
