Need help?Do you have a question about the Xyron Creative Station and is the answer not in the manual?
General| Model | Xyron Creative Station |
|---|---|
| Max Material Width | 9 inches |
| Function | Laminating, Sticker Making |
| Power Source | Manual (No Power Required) |
| Refill Type | Drop-in Cartridges |
Easily transform items using Permanent/Repositionable Adhesive, Laminated Adhesive, Two-Sided Laminate, and Magnet.
Quickly change drop-in cartridges for 9" and 5" rolls to minimize waste and maximize flexibility.
Ditch messy adhesives for professional results, keeping work surfaces, hands, and projects clean.
Get immediate results anywhere without warm-up, cool-down, or dry time.
Feed your item into the machine on the feed tray using the alignment guides.
Turn the handle clockwise while continuing to feed the item completely through.
Press down and slide trimmer to cut cleanly. Remove clear film and peel your sticker.
Apply for a secure, reliable bond. Available in 9" and 5" sizes.
Lift and reposition items easily. Available in 9" and 5" sizes.
Protect and permanently adhere items. Available in 5" size.
Preserve and protect documents. Available in 9" and 5" sizes.
Create durable magnets. Available in 9" and 5" sizes.
Open cartridge compartment by pushing the button and lifting the lid.
Pull the cartridge up and out of the machine.
Drop the cartridge into the machine using the internal tracks as a guide, with the label facing you.
Place the material flap between the two rollers.
Close the lid by pressing down until it clicks into position.
Follow steps 1-3, flip up the 5" cartridge adapter, and use it with the internal track as guides.
Rub item after trimming for transfer, remove clear film, peel sticker, and apply.
After trimming, cut items to the edge; laminate will not peel. Peel and apply.
After trimming, cut items to the edge; laminate will not peel.
Apply laminated magnets to surfaces after trimming.
Turn handle slowly, use items 1/8" thick or less, clean rollers, store properly, and check lid closure.
Use various materials like paper, canvas, fabric, cork. Wash fabric sizing and stitch after adhering.
Avoid overlapping items for edge-to-edge coverage; remove excess adhesive.
Test for wrinkles before use; fold cardstock to smooth out any occurring wrinkles.
To Next Page
