The Xyron® Tape Runner is a targeted adhesive applicator designed for various crafting and everyday uses, offering a clean, efficient, and fast way to apply permanent dot matrix adhesive. This user guide provides a comprehensive overview of the device, its features, usage instructions, and maintenance tips.

Function Description:

The primary function of the Xyron® Tape Runner is to apply a permanent dot matrix adhesive without creating a gummy mess, ensuring a clean application. It is preloaded with 40 feet of permanent adhesive, making it ready for immediate use. The device is designed for ease of use, allowing users to apply adhesive quickly and accurately. The adhesive provides a secure and reliable bond for various materials.

Important Technical Specifications:

Adhesive Type: Permanent dot matrix adhesive.
Adhesive Length: Preloaded with 40 feet of adhesive.
Cartridge Compatibility: Accepts 3/8" cartridges.
Cartridge Type: Permanent Adhesive (#3302-12-32).
Adhesive Properties: Acid-free and non-toxic.
Refill System: Drop-in cartridges for quick and easy refills.

Usage Features:

The Xyron® Tape Runner is designed for straightforward operation, emphasizing convenience and precision.

Positioning: To begin, the user pulls down the protective cap to expose the adhesive tip. The tip is then positioned onto the item's surface where the adhesive is to be applied.
Application (Press): Once positioned, the user presses down on the device to apply even pressure, initiating the adhesive transfer.
Application (Pull): While maintaining pressure, the user slowly pulls the device across the surface to run a continuous strip of adhesive.
Refill System (Change Fast): The device features a drop-in cartridge system, allowing for refills in seconds. To unload/load a cartridge:
1. Open Cartridge Compartment: Push a button to release and lift the lid of the cartridge compartment.
2. Pull Cartridge Out: Gently pull the used cartridge up and out of the applicator.
3. Drop Cartridge In: Place a new cartridge into the applicator.
4. Close Lid: Press the lid down until it clicks into position, securing the new cartridge.
Portability: The "super handy size" of the applicator makes it easy to control and use for various tasks.
Versatility: The adhesive can be used on a wide range of materials, including paper, cardstock, vellum, fabric, ribbon, twine, craft foam, tissue paper, buttons, photos, paper flowers, and newspaper.

Maintenance Features:

While the device itself requires minimal maintenance, the user guide provides helpful tips for optimal performance and longevity.

Application Technique: To ensure proper adhesive release, a slower motion is recommended, allowing the dots enough time to transfer from the plastic liner. Maintaining a level adhesive tip and applying even pressure are crucial for a full strip of adhesive.
Storage: To preserve the quality of the applicator and cartridges, they should be stored in a cool, dry place.
Adhesive Removal: In case of excess adhesive, it can be removed using a finger or a Xyron® Adhesive Eraser (sold separately).
Fabric Preparation: When using the adhesive on fabric, it is advised to wash any sizing from the fabric beforehand to ensure better adhesion.

The Xyron® Tape Runner is presented as an "unstoppable hold" solution, making adhesive application "easy." Its design focuses on user-friendliness, efficiency, and reliable performance for crafting and other adhesive needs.

Xyron Tape Runner - Features

Table of Contents

Related product manuals