INTRODUCTION
Thank you for purchasing our soldering station – the best solution for your soldering
equipment needs! We believe that you will be more than satisfied with many features
and the versatility of your new soldering station. Please carefully read the instruction
manual prior to operation to maximize the advantages of using your new soldering
station.
WARNING:
This appliance is not intended for use by children or other persons without
assistance or supervision if their physical, sensory or mental capabilities prevent
them from using it safely. Children should be supervised to ensure that they do
not play with appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, or its
service agent or similarly qualified persons in order to avoid a hazard.
Failure to observe the safety regulation will result in a risk of life and limb. The
manufacturer shall not be liable for damage resulting from misuse of the unit or
unauthorized alterations.
CAUTION:
REMEMBER, THE TIP IS HOT!
◆ Keep the soldering tip and heating element away from the body, clothes and
flammable material when in operation. Always replace the solder wand to its
original holder when not being use. The soldering tip and the heating element are
still remaining hot after being switched off. Ensure that you do not touch the
soldering tip and the heating element.
This tool must be placed on its stand when not in use.
DO NOT WORK ON LIVE CIRCUITS
◆ Before working on any mains powered equipment, make sure that it is turned off,
and the mains plug is removed from the power point. You must not undertake
work on live parts.
DO NOT USE IF DAMAGED
◆ If the power lead becomes damaged or the soldering station becomes faulty,
discontinue use immediately. To comply with safety standards, the power lead
must only be replaced by authorized technicians as special purpose tools are
required. Only the technician is permitted undertake repairs. Use the original
replacement part only.
To Next Page
Loading...
Need help?
General
