This document is an instruction manual for the Yabano Water Kettle, model KE4012. It provides essential information for safe operation, usage, and maintenance of the appliance.

Function Description

The Yabano Water Kettle is designed to heat water. Its sleek gooseneck design allows for precise control of water flow during pouring, which is particularly beneficial for brewing coffee as it enables slow and even saturation of coffee grounds to extract optimal flavor. The kettle features built-in temperature control, allowing users to select and maintain specific water temperatures for various beverages.

Important Technical Specifications

The kettle body is made of SUS304 stainless steel, and the lid is made of SUS (Stainless Steel). The temperature settings range from 104°F (40°C) up to 212°F (100°C). The kettle has an overheat protection feature that automatically shuts off the appliance if it is turned on without water. It includes a "Keep Warm" function that maintains the water temperature for 30 minutes.

Usage Features

Getting Started:

Remove all packaging.
Place the kettle on a flat, dry surface.
Plug the power base into a wall outlet.
Before first use, fill the kettle to the MAX line with water, boil it, then pour it out and rinse. Repeat this process several times to clean the kettle.
If the kettle is turned on without water, the overheat protection will activate. Allow the kettle to cool for at least 15 minutes before refilling.

Operating the Kettle:

Remove the kettle from its base and fill it with water up to the desired level, but not exceeding the MAX line located inside near the handle.
Place the lid on the kettle and set it back on the power base.
Once placed on the base, the kettle will beep, and all indicator lights will turn on. "000" will be displayed on the LED screen, indicating it's connected.
The current water temperature will be displayed for about 5 seconds. If no action is taken, the kettle enters standby mode, and the power button blinks slowly until unplugged.
Press the power button (it will turn red) to activate temperature adjustment.
Use the Increase/Decrease Temperature Button to set the desired temperature. Each press adjusts the temperature by 2°F, while a long press adjusts by 9°F. The available temperature range is 104°F to 212°F.
If the set temperature is lower than the current water temperature, the kettle will turn off.
Once the water reaches the set temperature, the kettle will beep once and turn off.
To maintain the water temperature, press the "Keep Warm" button. If no button is pressed for 30 minutes in keep warm mode, the kettle will turn off.

Temperature Recommendations for Beverages:

Blends for babies: 104-140°F
Green and white tea: 175-185°F
Instant coffee: 194°F
Black tea: 212°F

Lid Tension Customization: If the lid is too hard or too easy to remove, its tension can be adjusted:

Remove the lid from the kettle.
Use a tool to adjust the tabs on the kettle lid.
Pushing in the tab decreases tension, making the lid easier to remove.
Pulling out the tab increases tension, making the lid harder to remove.
Adjust and test until the desired tension is achieved.

Maintenance Features

Cleaning the Exterior:

Wipe the exterior with a damp cloth and dry thoroughly.
Do not use harsh chemicals or abrasive cleaners, as these can damage the finish.

Cleaning the Interior (Descaling): Lime scaling can build up inside the kettle with regular use.

Fill the kettle with water and add vinegar or lemon juice.
Let it sit for 1 hour, then boil the water.
Empty the kettle and rinse thoroughly with cold water.
Repeat steps 1-3 if necessary (1-3 times).
To eliminate any vinegar smell, boil water several times and pour it out.
Wipe the interior and exterior surfaces with a cloth. Regular descaling is important to protect the kettle from damage.

Storage:

Clean and dry all parts of the kettle before storing.
Store the kettle in its original box or in a clean, dry place.
Never wrap the power cord around the kettle.

Safety Precautions (Important Safety Instructions):

Always unplug the appliance when not in use.
The kettle is for heating water only; other liquids may damage it.
Only carry the kettle by the handle as surfaces are hot and can cause burns.
Regularly check the kettle and cable for damage. Do not use if damaged.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service station.
Do not attempt to repair the device yourself; consult an authorized expert.
Keep the kettle and cable away from heat, direct sunlight, moisture, and sharp edges.
Only use manufacturer-provided accessories.
Do not remove the lid while the kettle is in use.
Do not fill above the MAX line.
Do not use the kettle outdoors.
Do not plug in the kettle before adding water.
Never immerse the kettle or power base in water or any other liquid.
Do not operate with wet hands. If it gets wet, unplug immediately.
To turn off, press the power button or manually remove the kettle from the base.
Keep out of reach of children and ensure the cable does not hang down where children can reach it.
This appliance is not intended for use by persons (including children younger than 8) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised.
Cleaning and maintenance should not be performed by children younger than 8, unless supervised.
The appliance is very hot during use; do not touch the kettle surface.
Never leave the kettle unattended while boiling water, especially near children.
Be careful when handling hot water to avoid burns.

Yabano KE4012 - Know Your Kettle

Table of Contents