UsingYourKettle
1.
Remove the kettle from the base.
2.
Remove the lid and fill the kettle
with water to the desired level. Do
not fill the kettle past the MAX line,
located on the inside of the kettle,
near the side of the handle.
3.
Plug the base into a wall outlet.
4.
Cover the kettle with the removable
lid and place it on the base.
NO
TE:
T
he
k
ettle may be
us
ed
onl
y
with
the
bas
e
pr
o
VIDED
.
Do
not open the
lid
when
boiling
w
ater
.
5.
The kettle will beep once
and all the indicator lights
will turn on, indicating that
the base is connected and
the kettle is in place. 000 will
be shown on the LEDdisplay
screen.
6.
The current temperature of
the water will be shown on the
digital display screen and will
be visible for about 5 seconds.
If no option is chosen, the
kettle will go into standby
mode and the power button
will blink slowly, until the base
is unplugged.
To Next Page
Loading...